زبری سنج – صافی سنج SRT-5100

زبری سنج – صافی سنج SRT-5100


30,900,000 تومان

( آخرین بروزرسانی : 11 بهمن, 1402 )

بررسی اجمالی محصول

زبری سنج – صافی سنج SRT-5100

دستگاه زبری سنج SRT-5100 ساخت شرکت HUATECH با دقت 1 میکرون و رنج اندازه گیری از 1 تا 800 میکرون

مناسب برای تست زبری (صافی) کلیه سطوح قبل از رنگ پاشی و پوشش دهی

دستگاه زبری سنج مدل SRT-5100 دارای طراحی زیبا و سایز کوچک جهت حمل و نقل می باشد.این دستگاه زبری سنج دارای  دقت بسیار بالا می باشد. این زبری سنج امکان اندازه گیری تابع متریک و امپریال را به کاربر می دهد.

مشخصات فنی دستگاه  SRT-5100 ساخت HUATEC :
سنسور اندوکتانس با دقت بالا
طراحی زیبا، کوچک با استفاده آسان
با قابلیت محاسبه متوسط ، حالت اندازه گیری متریک و امپریال

 

نقد و بررسی : زبری سنج – صافی سنج SRT-5100

زبری سنج – صافی سنج SRT-5100

زبری سنج – صافی سنج SRT-5100 میزانی برای تعیین بافت سطح است و با تعیین میزان تغییرات عمودی بر سطح نسبت به سطح صاف واقعی تعیین می شود .در صورتی که این تغییرات زیاد باشد سطح زبر و در صورت کم بودن نرم است .این کمیت نقش مهمی در تعیین اثر متقابل اشیاء با هم داشته و با دانستن آن بسیاری رفتارهای اجزاء مکانیکی قابل پیش‏‎بینی خواهد بود .برای مثال اشیاء زبر بیشتر در معرض خوردگی و ترک دار شدن هستند .برای اندازه گیری زبری از روش های تماسی و غیر تماسی مختلفی استفاده می کنند .

دستگاه زبری سنج SRT-5100 ساخت شرکت HUATECH با دقت 1 میکرون و رنج اندازه گیری از 1 تا 800 میکرون

مناسب برای تست زبری (صافی) کلیه سطوح قبل از رنگ پاشی و پوشش دهی

مشخصات فنی زبری سنج – صافی سنج SRT-5100 :

سنسور اندوکتانس با دقت بالا

طراحی زیبا، کوچک با استفاده آسان

با قابلیت محاسبه متوسط ، حالت اندازه گیری متریک و امپریال

زبری سنج SRT
زبری سنج SRT

Detailed Product Description

* This Digital Surface Profile Gauge is a handheld gauge for fast and accurate measurement of the peak-to-valley height of the surface profile of blast cleaned surfaces.

* It meets the standards of ASTM D 4417-B, IMO MSC.215(82), SANS 5772, US Navy NSI 009-32, US Navy PPI 63101-000. Suitable for the laboratory and for use in harsh field conditions. Accurate, immediate and repeatable results.

* The tungsten carbide tip will last for up to 20, 000 readings and can then be easily replaced by the user in the field.

* Cost per test is significantly lower than other test methods.

* Used the exclusive Micro -computer LSI circuit and crystal time base to offer high accuracy measurement.

* Can communicate with PC for recording, printing and analyzing by the optional software and cable for RS232 interface. USB adaptor and Bluetooth interface can also be used.

* Automatic power off to conserve power.

* Widely used in field of blast cleaned surface measurement. If the profile is too large the amount of coating required to ensure adequate coverage increases, otherwise there is a danger that the peaks remain uncoated – allowing rust spots to occur. If the profile is too small, there maybe an insufficient key to produce adequate adhesion, leading to premature coating failure . Ensuring the correct surface preparation optimises the performance of the coating and material usage.

SPECIFICATIONS:

Display: LCD

Range: 0 μm to 800 μm (0 mils to 30 mils)

Accuracy: ±5% or ±5 μm, (whichever is the greater)

Resolution: 1 μm (0.1 mils)

Metric and Imperial switchable

PC interface: RS232C

Measurement speed: >30 (readings per minute)

Power off : 2 modes (Manual off at any time by depressing the

power key till OFF shows on the display or Auto power off after 3

minutes from last key operation.)

Weight: 280 g

Dimensions: 162×65×28mm (6.38″ x 2.55″ x 2.10″)

Operating temperature: 0°C to 50°C (32°F to 120°F)

Case: High impact ABS

Batteries: 4×1.5v (AAA) battery

Standard Accessories of digital surface roughness tester SRT-5100:

Main unit………………1pc.

Carrying case…………1 pc.

Operation manual…….1 pc.

Optional accessories:

RS232C cable, USB adaptor, Bluetooth interface

مشخصات فنی :

برند

گارانتی

ویژگی های خاص

, , ,

رنج اندازه گیری

0 میکرون μm تا 800 μm

دیدگاه

دیدگاهی ثبت نشده.

اولین نفری باشید که نظر می دهید برای “زبری سنج – صافی سنج SRT-5100”

همچنین ممکن است دوست داشته باشید…